DESCRIPTION Floor Coat Alkyd Polyurethane Floor Paint has been formulated for light industrial concrete floors including for domestic use. It dries to a tough durable finish with excellent adhesion. It is supplied in a range of standard colours and has a medium gloss finish. FEATURES - Tough, durable, thin film floor paint system. - Designed to be resistant to most household chemicals. - Single pack. (requires no catalyst) - Excellent stain resistance and easy to clean. - Provides a medium gloss finish for practicality and cleanliness. - An economical, hard wearing, hygienic, and fashionable coating. AREAS OF USE - Interior concrete floors - Interior wooden floors - Interior porous tile floors SURFACE PREPARATION EXISTING DRY/CURED UNPAINTED FLOORS 1. Ensure floor is cured with a moisture level below 15%. (Do not paint wet floors). 2. Clean floor and degrease if necessary. (Pink All Purpose Cleaner) 3. Acid wash floor with undiluted acid (spirits of salt) and rinse well (immediately) with freshwater. There must be no acid left on the floor. Allow to dry. 4. Apply the first coat of FloorCoat DILUTED 10% with mineral turpentine. Allow 6 or longer hours to dry @ 25 deg C. 5. Apply second coat of UNDILUTED Floor Coat. Allow to dry. USEFUL NOTES Floor Coat can get traffic after 18hrs, but will only reach full cure and hardness after 7 days. With polyurethanes, it is far better to apply more thin coats than fewer thick coats. Its important to spread the coat using a short hair mohair roller. The viscosity of Floor Coat is designed to give a melted flow finish, so do not over work (up and down) on application. AVAILABLE IN 1Lt and 5Lt COVERAGE 1Lt will cover 5 to 6 sqm for the two coats required. 5Lt will cover 25 to 30 sqm for the two coats required. SAMPLES If you're unsure of a colour, our 1lt's are economical to try out and test. PLEASE NOTE Colours are not refundable.
